I recently had some success in finding the original 5 digit radio code for an early Mercedes Sound 10 radio unit fitted to a friends 2004 Mercedes Sprinter using this decode list.
You might want to give it a try.. No promises, but its worth a go! Just enter the last 8 digits of your Sprinters VIN into the grey window of the downloadable decoder spread sheet and then press enter – if the radio code is known against the VIN number it will be displayed in the yellow window. If ‘N/A’ is displayed then its not your lucky day, sorry! This will only work if you still have the original radio fitted from when your vehicle left the factory. Remember this is for the early series of sprinters with the radio as the picture above.
If the above does not work out for you I still may be able to assist with the code for your old model radio cassette unit. Remove the radio from the dash and take down the Becker model and serial number from the paper label on the side of the set. List these details in the comments box beneath this post with your request and I will see what I can do.
PLEASE NOTE – while I will always try and help out Mercedes owners in any way I can ‘for free’ . In providing this service, it does take up some of my valuable time and the website needs to be hosted and funded in some way. So if you have been helped with a Radio Code or found other information that it has personally saved you some time and money, you can click on the link to purchase the downloadable 2015 Mercedes Gen-In Review Ebook for £3.50 (Less than £5.00 USD) or by simply donating a small amount via PayPal with the button below. Making a donation or buying a hard copy of the website and its contained information will show your appreciation and thanks, helping to support the site so that you and others may continue to benefit from its existence. 🙂
Many thanks for your support,
Steve
(Mercedes Gen-In)
Instructions for entering the code:
After switching on the unit the display will show ‘SOUND 10’ for a brief time then clear.
Press [ ON ] and ‘SOUND 10’ will display again followed by ‘CODE * * * * ‘ The ‘C’ will be flashing.
Press [ + or – ] to increment/decrement the first digit of the code, then press [ M ] to select the second digit.
Repeat the procedure until all digits have been entered.
Upon entering the last digit press and hold the [ M ] key to accept the code.
The set will now turn on.
If ‘WAIT’ is displayed on your radio: This means that the incorrect code has been tried too many times. If you leave the radio powered on for over two hours it should reset and clear, allowing you to enter the new and correct code. It is possible for repeated could lock you out of the radio altogether, if this is the case WAIT will not disappear after two hours. The radio will then have to electrically unlocked at an auto electrical radio specialist.
Hi Steve.
Looking for a code for my Sprinter.
Last 8 digits of VIN are:
2R265754
Many thanks,
Adam
Hi Adam,
I will need the Becker model number and serial number from the sticker on the side of the radio.
Regards
Steve
Hi Steve.
Thanks.
How do I get the bloody thing out?!
Cheers,
Adam.
Hi Adam, you will need radio removal keys that go into the small slots either side at the front. However the alternative is just to remove the upper dash cover in one piece and lift it up to read the label. This is not a huge job though any garage worth their salt should have removal keys at the ready for the price of a beer!
All the best
Steve
Steve, you’re an absolute gent.
I bought a set of keys on Amazon for a quid and I now have the serial number.
It’s model BE4103 and serial number Y8068072.
Cheers for all your help; it’s you that deserves the beer mate!
Hi Adam,
Here is the code for that Mercedes radio: 55153
All the best
Steve.
(keep the code and removal keys safe!)
Cheers Steve, you’re a star!
hi, i hopeyou can help, i have mercedes 320clk and need the radio code for an “audio 10 cd” unit, part no is- A170 820 03 86 , MODEL NO- MF2910 AND SERIAL NO IS- AL291010684222, thanks in advance for your help
Hi Phillip,
The radio you have is manufactured by Alpine and not Becker. If it were Becker, I could most probably help you but as it is an Alpine unit my code list is no use.
Sorry.
Best Regards
Steve
Hey.
I need the code for my Mercedes-Benz audio 10 BE 3100. cassette player radio
serial no. 12859933
Could you help?
Thanks in advance 🙂
Hi Håvard,
The code you need is 43411, this will unlock the old Mercedes 10 Radio.
Regards
Steve
Thank you very much. The code was authentic. Radio is up and running 😀 yay!
Please help on having the code for my mercedes benz radio. The model is BE4103 (A 003 820 91 86), the type is sound 10. The serial number is 28202500. Thx
Hi Vamara,
The code for your older Mercedes Sprinter radio is: 12112
All the best
Steve
thx steve. code was accepted, but radio not working. is there anything after setting the code
Hi there Vamara,
There is nothing more to do, the radio/cassette should all work if you followed the entry instructions on the post page (followed by the M key). It may be the speakers are faulty (not uncommon) or there is a plug disconnected at the rear of the radio. There should be two banks of terminals connected, the lower one for power and the other to the speakers. If there is still no sound with known good speakers, then sadly it appears the radio itself may be faulty.
Best Regards
Steve
Dear Steve, could yo help me?
Becker audio 30 aps
serial 4716JP041127727 (or just 41127727)
thank you!
Hi there Lina,
The code for your Audio 30 radio is not listed on the Sprinter accessory list I have, however I had a look at the serial number and it should be one of the following – you will just have to try them to find the one that works!
71815
51235
31411
My feeling is that it will be the first one.
Best Regards
Steve
Was the second one, after one month of silence I have a music again, thank you!!! 🙂
Hi Steve,
Can you help me? I cannot find the book where is wrote my code. I have a 98 Mercedes E320 with a Becker BE1692 serial number 1165426. Mercedes-Benz 003 20 59 86 [91] also with the number 1692H50U1165426.
Hi Bryan,
Write this on a sticker and stick it under the ashtray insert, white paint marker pen works well too! – 51232
All the best
Steve
Thank You!!!
You are a lifesaver!!!
Could you let me know the radio code for Becker/Merc radio 10.
Model/serial number BE410328217172. Thank you.
Hi John,
Your code should be: 51551
regards
Steve
Hi!
Could you help me getting the code for a mercedes Stereo?
It is model MF210
S/N AL291020414049
I tryied many options and websites but I cannot get the correct code.
Thankyou
Santiago
Hi Santiago,
You can try these numbers but I am unsure they will work with a MF210
52215, 14411, 18815, or if a four digit code 8815
Regards
Steve
Hi Steve,
This is a call for help from germany!
My Vito is equipped with a Sound10 and i have no code card for it!
The VIN is WDF63809413450339
Maybe you can help?
Thanks a lot in advance!
Best regards
Uwe
Hi Uwe,
I am afraid that VIN is not listed on my sheet, if you can get me the Becker model and serial number from the side of the radio chassis (on a sticker) I can provide you with the code.
All the best
Steve
Hi Steve
It took me some effort to dismount but i made it!
It is a Becker BE 4113, Serial No is 18084325
Made In South Africa
Best regards
Uwe
Hi Uwe,
Thats what I needed. Your code for this early Mercedes radio is; 23136
All the best
Steve
Hi Steve,
It works!
Well, after 6 month without radio it is phantastic to have music in the car again!
Thanks a lot for your help!
Best wishes
Uwe
Model Cm2299 A 208 820 05 86 i have a 1999 clk320 Mercedes pls Radio coder
Hi there Todd,
I am unsure if the code sheet I have will work with set, however if you would like to get me the serail number from the side of the radio chassis on the paper label I will gladly have a go.
All the best
Steve
Hi have old 2001 sprinter with radio above gives
serial number as 18094622
Be – 4103
MODEL 4103
LONG SERIAL NUMBER AS *4103DA018094622
Hope that’s all the information
Hi John,
The older Becker MB Sound you have there should work with this code: 21625
All the best
Steve
Thanks for your help will try morning cheers
Hi
Wdb9026221r769274
Many thanks
BENJAMIN
Hi Benjamin,
If you can let me have the Becker serial and model number from the sticker from the side of the radio chassis I can probably help.
All the best
Steve
Hei .. i’ve got the serial from the side of the cassette . : SOUND 10 BE 6045
SERIAL NO: 48119277
but there is a thing after i start the radio it appears sound 10 followed by “WAIT” and it remains like that for long time .. i can’t even pass the code :-?? what do i have 2 do ?
THANK YOU !
Hi Benjamin,
The ‘Wait’ display means that the incorrect code has been tried too many times. If you leave the radio powered on for over two hours it should reset and clear allowing you to enter the new and correct code of 11514.
All the best
Steve
Hi Steve.
Would you please help me to get the code for my radio BE 1491
S. Number :1035469
Hi Sultan,
Your code should be: 61226 However there are variants of that radio that may need one of the following alternative codes if the first one listed does not work. They are: 41222, 81226 or 1226 if a four digit code is required.
All the best
Steve
Hi Steve!
Thanks for your promise to assist us with our code.
Kindly help for BE1150R1087651
Thanks
Hi Amadi,
Your BE1150 Mercedes radio code is 31431
All the best
Steve
Hi Boss Steve,
I can’t thank you enough for providing the much needed code for me. My heart is full of joy and I am really very grateful. May the good Lord bless you richly.
Thanks a million.
Amadi
Nigeria.
Call
1 800 926 8254
They will give you your code for free
They need your last 8 numbers of your vin# and must be original Radio
Thanks for that Tom, Good info for those in the US if they still have the original radio as fitted when new.
All the best
Steve
hola me podrias ayudar con el codigo de una sprinter 2004 el vin es WD3YD64314R694465 es sprinter 2004, el codigo be 4143 es un sound 10, be 4143 n. de serie 38008349
Hi Juan Roberto,
The code for the old model Sprinter radio you have should be: 63442
Regards
Steve
Hi Steve,
Thanks for your informative site. Hope you may be able to assist me, with a code for my Sprinter radio. Here’s the information :
Last eight digits 2R155325, BE 4103, Serial nos. Y5016123
Hope this is all you require,
Regards
Trevor
Hi Trevor,
Your BE4103 code should be: 63531
Regards
Steve
Hi my car vin number is WDB203708 2A593505, can you help with the radio code please I’ve tried the excel file, but no luck!
Cheers Pete
Hi Pete,
If the VIN is not listed you will have to let me have the Becker model and serial number from the paper label on the side of the radio chassis, once I have these I stand a good chance of being able to help you out.
All the best
Steve
hi do u have a code for a sprinter mercedes van vin number is WDB9036622R837138
its a sound 30 model number BE6052 serial number 58016068 and it a becker Q03 thanks
Hi Chris,
25511 should do the trick on this radio.
All the best
Steve
Hi my serial nr r be 3200y8007791 audio 10 becker can you please help me
Hi Patrick,
Try the following code: 64331
If by chance it does not work try: 84111 or 44111 though I have a feeling it will be the first one above.
All the best
Steve
no that code not working on radio 25511 any thing else can try thanks
Hi Chris,
In that case the only other possible combinations can be, 41113 or 45517. If these do not work there is possibly an issue with the radio, let me know how you go on.
Regards
Steve
hi it was the right code it working now my dad was press wrong button to confirm it i just went over to check and it sorted now thanks for the code
Hi Chris, Excellent news. As you now know press the M key to accept. It was documented in the original posting – but no matter you are up and running!
All the best
Steve
Hi Steve,
Just purchased some radio removal keys off E-Bay as someone previously mentioned (very helpful by the way), and have removed the radio which says Model BE4103 and Serial No: 18116160 could you possibly assist with code?
We have tried 3 codes and now have the “WAIT” displayed and hope we are not locked out permanently. Will find out in 2 hours when I go back and check. Hope you can help. Bri.
Hi Bri,
I have the code 11644 listed for that BE4103 Sprinter radio. Just give it a while with the power on and it should reset so you can try again.
All the best
Steve
Hi Steve,
Code worked thank you soooo much. Bri
Hi Steve,
Could you please help me unlock my Mercedes radio?
It is a BE6045
Serial: 38030716
A 004 820 16 86
Many thanks,
Hi Theodore,
The older Sprinter radio you have will be unlocked with code 22325 don’t forget to press ‘M’ to confirm when you have entered all the digits.
All the best
Steve
Thank you very much Steve,
I really appreciate your help.
It worked like a charm.
GBU
Hie Steve
Please help me get a code for mercedes benz
Serial No; BE310032973064
Hi Thatie, Your code should be 13125.
Regards
Steve
Hi,
Can you please help with radio code for our Spinter it is a sound 30 Model number BE4603 Serial number18007988, much appreciated.
Cheerz Steve
Hi Steve,
That Mercedes Sound 30 should unlock with the code: 21313
All the best
Steve
hi steve ..just replace the old battery and lost radio code .. can you help me please
model; BE3100
SERIAL no ;Y1188045
thanks mate .
Hi Erdinch,
Your Mercedes BE3100 code should be 11311
Regards Steve
hi can u help me with my radio code….model…”mcs”….model numb…nv4bn110
Hi there Omar,
I do not recognise this code as a Becker radio so am unable to help sorry, it seems the ‘Modular Control System’ sets with Navi from the W163 ML etc were manufactured by Alpine. You may get your code here but will have to pay for the information I think. Good luck.
http://www.radiocode.ivgsoft.com/radiocode.php?id=385
Regards
Steve
Hello,
My 1998 Mercedes s420’s VIN is WDBGA43E2RA141488
Can you help me find my radio code,
Thanks!
Hi Clint,
You would have to pull the radio and get the Becker model and serial from the paper sticker on the side. If its a Nav unit then I probably can’t help sorry.(standard radio we should be OK)
All the best
Steve
Hello Steve!! Help me pleaseeee!!
model
BE 1492
Serial
s1056700
Greetings fom Paraguay!!
Hi Elias,
Your Mercedes radio should accept the code: 11263
All the best Steve
Thanks!!! it works!!! a year ago we don´t have radio!!!
Hello Steve. Help me please
Becker Q02 Sound 10
BE 6045
Serial 48116528
Greetings from poland
Hi George,
The code for your old model Sprinter radio cassette player is: 35132
Regards Steve
Hi Steve please code for ours Sprinter 🙁
BECKER SOUND 30
Model No : BE6052
Serial No : 48006483
Thank you so much 🙂
Hi Martina,
31142 should bring the Sprinter radio you have to life.
Best regards
Steve
Thanks but Dont work 🙁
Hi Martina,
That is strange as that code 31142 is listed for that serial number. However you can try the following as they are for slightly different versions and may work. 11144, 51148 or if a four digit code 1148. If none of these codes work and you have given me the correct serial number, I can only suspect that the radio is faulty.
All the best
Steve
Now working ! Thank you very much Steve ! You are Boss ! 🙂
Hi Martina, that is great news! For future record, which one of the codes worked?
All the best
Steve
hi, would you have the code for my 2003 sprinter radio? It’s a becker ,serial number 38061609
Model BE 6045
Any help would be muchly appreciated.
Thanks andy
Hi Andy,
You should be good to go with – 44111
Regards
Steve
Hi Steve, code worked a treat thank you, a true legend!!! Andy
Hi!
I am looking for Becker radio 5 digit security code for 2006 sprinter van model# BE6056
Serial# 58030272
Thanks
Hi Steve,
56512 should unlock the Sprinter BE6065 you have there.
All the best
Steve
Hi Steve,
The code worked and the radio works like a champion!
Thank you very much for your help. It’s greatly appreciated.
Steve K.
Hi Steve,
Pleased it worked out for you!
All the best
Steve
Hey…plesse cod for radio serial no:38054528
Hi Mirsad,
Can you tell me what Becker radio model you have?
Thanks Steve
Hi Steve.
Greetings from Perú, mi bercedes benz is a SPRINTER 313 cdi 2009, i dont have de radio code, and i don´t now the radio serial number, can You help me please???
Hi Miguel,
What is the issue? As I understand it there is no actual ‘code’ used on the modern Mercedes Sound 15 and 20. Do you have a ‘PROD’ display error or another fault? Tell me more…
All the best
Steve
Hi Steve,
I wonder if you can help me?
I am looking for a Radio Code for a Sound 4000 Unit that is fitted to a 312 Sprinter (4×4) that I am refurbishing. Its a Grundig Unit and the Serial Number is DB1160X1651098.
The last 8 digits from the VIN are 2P939391. Best regards, Paul.
Hi paul,
Sadly there is nothing I can do with Grundig I am afraid, I only have lists for Becker. There is however plenty of online decoder sites that will do the job for you for around 10U$ or less. Sorry about that.
All the best
Steve
Hi steve!I’m looking for code for my sound 30 radio cd.the model is be 4613 and the serial number is Y8002551!Thank you very much!!
Hi Kostas,
13116 Should unlock the Mercedes sound 30. If not let me know.
All the best
Steve
Steve you are the best!!my sound 30 works great!!thank you very very much!!
Hi, I have a 98 and a 99 e.320 I replaced the battery in the 98 and the code was taken no problem and all of a sudden its displaying “phone.” I tried everything that i could and no luck..my 99 isn’t running but the radio was fine and i swapped them only to have that radio say “muted” I’m about to see about a different brand that will fit unless someone can tell me whats up…thanks for your time
Hi Kenny,
I suspect that there is maybe a problem with either an existing pre-wire kit/controller module for a mobile phone. Either that or the wiring loom/mute-phone line is grounded or trapped somewhere. If you unplug the uppermost plug of the stack of connectors on the back, this should disconnect all the wiring to any external kit including anything related to ‘Phone – Mute’. Better still, if you can identify and remove only the green section (middle portion) of the upper connector block this will then retain the parts of the connector either side and any external CD changer control you may have will be maintained. See here for wiring connections -http://www.mercedes.gen.in/Downloads/Mercedes%20Sound%20ISO%20Connector.pdf while they may not be identcial to what you have installed, it should be pretty close to get the principal idea.
Just a thought – have you disconnected the battery supply lead and left it off for a short while (10 mins or so) then reconnected? May be worth a go, as the older MB electronics were always susceptible to battery reconnection and also jump starting upsets. Sometimes starting from scratch and resultantly resetting everything, often straightens things out.
Hope this helps,
Regards
Steve
Hi Steve, My wife has a 2002 Merc Slk with an Alpine 10 Radio/CD player.
Serial code AL291020398306. Can’t find the code anywhere can you help or suggest who can please
Hi There Barry,
I can’t help with anything other than Becker units I am afraid as I don’t have the lists, however these folks at DND services seem very reputable and should be able to decode your set for you. Obviously there is a cost implication in using these services. (I Think they are upgrading their website at the moment but should be back online in a day or so.)
The MF2910 seems to present most with a problem to decode. If you post your request and serial number on the more specific boards (google MF2910 decode) then you may get some assistance. It is usual for more dedicated auto radio repair shops to do a code dump, which means reading the chip inside the radio by electrical means and by decoding this ‘dump’ they can extract the code. A more complex arrangement and you would definitely have to either send off your radio or leave it with them for decoding.
Sorry that I could not be of more help.
All the best
Steve
Hi Steve,
I lost the code of my Sound 10.
Model No. BE 4103
Seriel No. Y5050547
Hope you can help me
Best regards
Hi Rainer,
41221 should get your old Sprinter Sound 10 working.
All the best
Steve
WOW……it works! Thank you very,very,very much for your time.
Very best regards
Hi Steve,
i hope you can help me with my Sound10
Model: BE6045
Serial: 58171243
Thanks
Sven
Hi Sven,
Your Sprinter radio should unlock using 42516.
All the best
Steve
Hi Steve.
Can u generate a code with the following info. Model no. BE 6021 Serial no. 21236108. thanks.
Hi there Jane,
The Sound 10 6021 has no ‘code’ to input as such, it is electronically paired through the vehicle communication bus with the vehicle ECU. I assume you will probably have the PROD display. This means that it is in use in a vehicle it was not code-paired for. A specialist auto radio repair shop may be able to decode it electronically, but would I would estimate it be in the region of minimum £35-£45 if you can find a workshop that can do it. Sorry I cannot be more help.
Regards
Steve
hi
could you please help me with my radio code
becker audio 10 be 3100
ser: y1308292
thanks
Hi Mogtaba
35412 Should do the trick on your older Mercedes Sprinter radio cassette.
All the best
Steve
thanks allot for you quick replay , but i can’t enter number five to the radio. i tried all method i found in the manual, didn’t work
Hi Mogtaba,
That is strange regarding the 5th Digit. Is the actual digit there on the display (probably shown as a ‘0’) or is it by chance only a four number code? If it is a four digit code I will investigate further if you can confirm please.
Regards
Steve
Hi Steve
Actually the code combined from five digits but I can’t enter the second digit which is 5 . The arrows not responding for increasing or decreasing.
Hi Mogtaba,
That is strange, pressing the left arrow key on the 4 way selector should advance you to the next digit of the code. Pressing up and down to increment the number then left again enters the digit and moves to the next code digit. Maybe you radio has a fault.
Click to access Becker_BE3100.pdf
Regards
Steve
hi steve,
my battery was disconnected on my 1999 sprinter, iv got the code from the back of the radio, the radio reads safe, i enter the 4 digit code but what button do i press to lock in the code, its a sound 4000 radio…
regards
gary
Hi Gary,
Code Entry for the Sound 4000 Mercedes radio is as Follows:
Switch Radio On – Display Shows
” SAFE ” Then Shows ” 1 – – – ”
Press preset ” 1 ” repeatedly – 1st Digit
Press preset ” 2 ” repeatedly – 2nd Digit
Press preset ” 3 ” repeatedly – 3rd Digit
Press preset ” 4 ” repeatedly – 4th Digit
With the correct code number now shown
Press & Hold ” LOUD/EXPERT ” To Enter
Regards Steve
Hi, Steve,
could you help me please with Merceded audio 10 cassete player code? 🙂 BE3100X1105973
Thanks.
Hi Evaldas,
The BE3100 Sprinter radio you have there should unlock with 61163
All the best
Steve
Hi Steeve,
please can i have the code of my Becker Sound 10
model:BE 4103
serial number: 28227160
All my regards from Madagascar 🙂
Hi Maers,
Your Mercedes radio code should be: 23631
Regards Steve
It works very well Steve thank you very much 🙂
Hi. I’ve got a w210 compressor with VIN WDB2100622B325879 with an audio 10 Becker. Model # BE3100 and serial number 12841897. Could you be of assistance please and help me get my uncles radio working again. It’s my fault , I took his battery of without considering the radio n now am in dire straights over the code. Thanks a million times in advance.
Hi Mitchell
11411 Should unlock the Mercedes Becker 3100
Regards
Steve
hi steve
i lost my code after change the battery
mercedes benz e230 1996
vin : WDB2100376A119847
i dont know which one radio serial number
(i get from the radio itself)
PCF8576T
438MA
YSM96102
TAIWAN
Hi Durratul,
The numbers you have given me for the model and serial I cannot recognise. The numbers I would need are the Becker model number on the paper label on the side of the radio chassis. I will also need the Becker radio serial number also printed on this label. What model of Mercedes radio is it?. Maybe with some more information I may be able to help, though I am suspecting the radio is too old for my records.
Best Regards
Steve
thanks for reply
i got the model actually
becker monza rds panel
BE2130
SAB80C535N
85C82smd
Hi Durratul,
I need the correct serial number from the paper sticker on the side/top of the outside of radio metal case, it should read something like “BE2130 R 100 44 09” I have checked and I should be able to get you the four digit code if you can provide me with the radio chassis correct serial number (not the numbers from the chips on the circuit board inside 🙂 ) It should start with ‘R’ and has seven number digits after it.
I have also found the code entry procedure below –
The security code entry procedure is as follows:
Turn radio on – LCD display shows “CODE” with a letter ” C ” flashing. Input your code, for example to Enter the code 1234 – Press preset 1 then 2 then 3 then 4. When the correct code number is shown on the display press the Tuning Up button ” ^ ” to enter. Radio should come alive.
All the best
Steve
Hi steve
It takes me 6months to pull out the radio..haha
I got the number above the radio
T 9100657.. I hope it works
Hi Durratul,
There is three possibilities tested my end, I hope one of them does the trick: 24321, 8329 (If four digit) and 62323
Hope it works out for you,
All the best
Steve
Hi steve ,
I works perfectly.
Thank you very much.